10,000 Watt 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control for Touring Applications
Delivering Rock-Solid Reliability and Sonic Purity
The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is LAB GRUPPEN’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.
Network Control
The FP 10000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl PC software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions. NB. operation of NomadLink requires the NLB 60E NomadLink Bridge & Network Controller which must be purchased separately.
Proven Ergonomics
View all key performance parameters at a glance – in real time – on the comprehensive front panel display. The FP+ provides the most complete and useful front panel indication on the market today. Bright, color-coded LEDs give clear status indication of all control activation, warnings and faults – without scrolling through menus. Conditions such as blown drivers, shorted lines, and over-temperature channels are easily recognizable. You won’t waste time trying to decipher a generic “trouble light.”
Around the Back
The FP+ rear panel provides all the input and output connections you’ll need plus RJ45 in and out for NomadLink® control and monitoring. With the DIP-switch matrix, you can assign a hard or soft attack to the limiter functions, set overall gain to one of seven different levels, bridge any pair of channels, and set the VPL for optimum output characteristics with the connected load. All in a matter of seconds while the amp is in the rack.
Under the Hood
To achieve the extreme power-to-size ratio in the FP+ Series, LAB GRUPPEN engineers refined and upgraded two proprietary technologies: the regulated switch-mode power supply (R.SMPS™) and the patented Class TD™ output stage. Both are incorporated in all four FP+ Series amplifiers. Working together, this new generation of proprietary circuits produces more power from a smaller package while at the same time maintaining LAB GRUPPEN’s peerless reputation for sonic excellence.
To ensure efficient, uniform cooling, the ultra-efficient Intercooler® uses thousands of tiny copper cooling fins to increase exposure of the heat sink to the cooling air flow.
Twin variable-speed fans respond to temperature sensors, forcing air over the Intercooler fins in a front-to-rear flow. All output devices are mounted transverse to the airflow, so the cooling effect is uniform. There are no “end-of-tunnel” output transistors subject to greater warming and, consequently, possible premature failure.
10,000 Watt, 4-channel amplifier with up to 2,500 Watts output per channel and NomadLink network for monitoring and control
Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
4 x 2,500 Watts into 2 Ohms, 4 x 2,100 Watts into 4 Ohms, 4 x 1,300 Watts into 8 Ohms, 4 x 660 Watts into 16 Ohms
Proven and reliable Class-TD output stage delivers Class A/B audio quality with Class D efficiency
Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
General
Number of amplifier channels
4
Peak total output all channels driven
10000 W
Peak output voltage per channel
150 V
Max output current per channel
50 A peak
Max output power (all channels driven)
2 ohms
2500 W
4 ohms
2100 W
8 ohms
1300 W
16 ohms
660 W
Max output power bridged
2 ohms
Not recommended 1
4 ohms
5000 W
8 ohms
4200 W
16 ohms
2600 W
Performance
THD 20 Hz – 20 kHz at 1 W
<0.1%
THD at 1 kHz and 1 dB below clipping
<0.05%
Signal to Noise Ratio
>112 dBA
Channel separation (Crosstalk) at 1 kHz
>70 dB
Input impedance
20 kOhm
Common Mode Rejection (CMR)
>54 dB, 20 Hz – 20 kHz
Gain, Sensitivity and Limiters
VPL, selectable per ch
150, 121, 101, 83, 70, 56, 47, 38 V
VPL, when bridged 2
300, 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.)
Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 2
23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain
35 dB
Level adjustment (per channel)
Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Output connectors (per ch.)
Neutrik speakON
Input connectors (per ch.)
3-pin XLR, electronically balanced
Output bridge mode
A+B – Ch. A is signal input source. A+B, C+D – Ch.’s A and C are input source
NomadLink network
On board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off)
Yes, depending on presence of output signal
Power on/off and Remote enable on/off
Individual switches on front-panel
Cooling
Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
Common
NomadLink Network; Power Average Limiter (PAL)4; Power on
Per channel
Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 3
130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V
171 V / 85 V
Power Average Limiter (PAL) 4
Yes
Soft-start / Inrush Current Draw
Yes / max. 5 A
Mains connector
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions
Dimensions
W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight
Weight
12 kg (26.4 lbs)
Finish
Finish
Black painted steel chassis with black painted steel / aluminum front
Lab Gruppen FP 10000Q 4 Channel Touring Grade Power Amplifier
$0.00
Please Call for Price
Description
FP 10000Q
Delivering Rock-Solid Reliability and Sonic Purity
The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is LAB GRUPPEN’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.
Network Control
The FP 10000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl PC software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions. NB. operation of NomadLink requires the NLB 60E NomadLink Bridge & Network Controller which must be purchased separately.
Proven Ergonomics
View all key performance parameters at a glance – in real time – on the comprehensive front panel display. The FP+ provides the most complete and useful front panel indication on the market today. Bright, color-coded LEDs give clear status indication of all control activation, warnings and faults – without scrolling through menus. Conditions such as blown drivers, shorted lines, and over-temperature channels are easily recognizable. You won’t waste time trying to decipher a generic “trouble light.”
Around the Back
The FP+ rear panel provides all the input and output connections you’ll need plus RJ45 in and out for NomadLink® control and monitoring. With the DIP-switch matrix, you can assign a hard or soft attack to the limiter functions, set overall gain to one of seven different levels, bridge any pair of channels, and set the VPL for optimum output characteristics with the connected load. All in a matter of seconds while the amp is in the rack.
Under the Hood
To achieve the extreme power-to-size ratio in the FP+ Series, LAB GRUPPEN engineers refined and upgraded two proprietary technologies: the regulated switch-mode power supply (R.SMPS™) and the patented Class TD™ output stage. Both are incorporated in all four FP+ Series amplifiers. Working together, this new generation of proprietary circuits produces more power from a smaller package while at the same time maintaining LAB GRUPPEN’s peerless reputation for sonic excellence.
To ensure efficient, uniform cooling, the ultra-efficient Intercooler® uses thousands of tiny copper cooling fins to increase exposure of the heat sink to the cooling air flow.
Twin variable-speed fans respond to temperature sensors, forcing air over the Intercooler fins in a front-to-rear flow. All output devices are mounted transverse to the airflow, so the cooling effect is uniform. There are no “end-of-tunnel” output transistors subject to greater warming and, consequently, possible premature failure.
General
Max output power (all channels driven)
Max output power bridged
Performance
Gain, Sensitivity and Limiters
Connectors and Buttons
Front-panel user interface
Power
Dimensions
Weight
Finish
Approvals
Additional information