Description

Classic version of a confirmed studio veteran, the AT4033.

Cardioid studio condenser microphone. 48V phantom

power. Transformerless. Includes AT8449 shock mount,

dust cover and protective mic carrying case.

• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
• Floating-construction capsule assembly provides isolation from noise and vibration
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
• Custom shock mount provides superior isolation
  

  ELEMENT	Fixed-charge back plate, permanently polarized condenser
  POLAR PATTERN	Cardioid
  FREQUENCY RESPONSE	30-20,000 Hz
  LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
  OPEN CIRCUIT SENSITIVITY	-32 dB (25.1 mV) re 1V at 1 Pa
  IMPEDANCE	100 ohms
  MAXIMUM INPUT SOUND LEVEL	145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  NOISE	17 dB SPL
  DYNAMIC RANGE (typical)	128 dB, 1 kHz at Max SPL
  SIGNAL-TO-NOISE RATIO	77 dB, 1 kHz at 1 Pa
  PHANTOM POWER REQUIREMENTS	48V DC, 3.2 mA typical
  SWITCHES	Flat, roll-off; 10 dB pad (nominal)
  WEIGHT	13.4 oz (380 g)
  DIMENSIONS	6.69″ (170.0 mm) long, 2.10″ (53.4 mm) maximum body diameter
  OUTPUT CONNECTOR	Integral 3-pin XLRM-type
  ACCESSORIES FURNISHED	AT8449 shock mount for 5/8″-27 threaded stands; microphone dust cover; protective carrying case
  AUDIO-TECHNICA CASE STYLE	R1