Description
50 inch Carbon fiber boom system with M1255B
The MicroBoom™ is available in two models, the MICROBOOM-50, which is 50 inches (1270 mm) long and the MICROBOOM-84, which is 84 inches (2134 mm) long. They are each made from a carbon fiber rod that can be utilized with any of the condenser microphones in the Micros series. Lightweight and able to attach to any microphone stand, the MicroBoomTM, is a problem solver for many hard-to-reach miking applications including choir, plays, and orchestra.
The MicroBoom™ can used with a choice of capsules in the Micros series, offering a broad choice of pick-up pattern and frequency response. High quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector. The stand adapter designed for the MicroBoom™ allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by using the flexible metal gooseneck just below the microphone. The MicroBoom™ provides an ultraclean, professional, and elegant appearance on stage while providing exceptional performance and portability.
Boom Specifications
Gooseneck Flexible Steel
Length MicroBoom™24 609 mm / 24 in
Length MicroBoom™50 1270 mm / 50 in
Length MicroBoom™84 2134 mm / 84 in
Diameter 7.4 mm / .2 in
Connections mini-XLRm (bottom)
mini-XLRf (top)
Weight MicroBoom™24 45 g / 1.6 oz
Weight MicroBoom™50 78 g / 2.5 oz
Weight MicroBoom™84 111 g / 4 oz
Finish Black Finish / White Finish
Transducer Type | Condenser |
---|---|
Frequency Response | 50 Hz – 19 kHz |
Polar Pattern | Cardioid, Hypercardioid, Omni, Shotgun |
Output Impedance | 150 ohms |
Sensitivity | 38 mV (C), 32 mV (HC) 40 mV (O), 60 mV (S) / Pa @ 1k |
Equivalent Noise Level | 21 dB (A-weighted) |
Signal to Noise Ratio | 73 dB |
Maximum SPL | ≥130 dB |
Power Requirements | 18 – 52 V |
Connector | 3 pin mini-XLRm |
Materials / Finish | Machined brass / Black or White Finish |
Weight | 16 g / 0.56 oz |
Length | 54 mm / 2.1 in |