The MicroBoom™ is available in two models, the MICROBOOM-50, which is 50 inches (1270 mm) long and the MICROBOOM-84, which is 84 inches (2134 mm) long. They are each made from a carbon fiber rod that can be utilized with any of the condenser microphones in the Micros series. Lightweight and able to attach to any microphone stand, the MicroBoomTM, is a problem solver for many hard-to-reach miking applications including choir, plays, and orchestra.
The MicroBoom™ can used with a choice of capsules in the Micros series, offering a broad choice of pick-up pattern and frequency response. High quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector. The stand adapter designed for the MicroBoom™ allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by using the flexible metal gooseneck just below the microphone. The MicroBoom™ provides an ultraclean, professional, and elegant appearance on stage while providing exceptional performance and portability.
Designed, assembled, manufactured, and tested in the USA
Boom Specifications
Rod material Carbon Fiber
Gooseneck Flexible Steel
Length MicroBoom™24 609 mm / 24 in
Length MicroBoom™50 1270 mm / 50 in
Length MicroBoom™84 2134 mm / 84 in
Diameter 7.4 mm / .2 in
Connections mini-XLRm (bottom)
mini-XLRf (top)
Weight MicroBoom™24 45 g / 1.6 oz
Weight MicroBoom™50 78 g / 2.5 oz
Weight MicroBoom™84 111 g / 4 oz
Finish Black Finish / White Finish
Microphone Element M1255B Specifications
Transducer Type
Condenser
Frequency Response
50 Hz – 19 kHz
Polar Pattern
Cardioid, Hypercardioid, Omni, Shotgun
Output Impedance
150 ohms
Sensitivity
38 mV (C), 32 mV (HC) 40 mV (O), 60 mV (S) / Pa @ 1k
Audix MB5055HC MicroBoom Hypercardoid Condenser Microphone
$679.00
Audix MB5055 Mic Boom w/1255 Hypercardioid Mic Element
Description
50 inch Carbon fiber boom system with M1255B
The MicroBoom™ is available in two models, the MICROBOOM-50, which is 50 inches (1270 mm) long and the MICROBOOM-84, which is 84 inches (2134 mm) long. They are each made from a carbon fiber rod that can be utilized with any of the condenser microphones in the Micros series. Lightweight and able to attach to any microphone stand, the MicroBoomTM, is a problem solver for many hard-to-reach miking applications including choir, plays, and orchestra.
The MicroBoom™ can used with a choice of capsules in the Micros series, offering a broad choice of pick-up pattern and frequency response. High quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector. The stand adapter designed for the MicroBoom™ allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by using the flexible metal gooseneck just below the microphone. The MicroBoom™ provides an ultraclean, professional, and elegant appearance on stage while providing exceptional performance and portability.
Boom Specifications
Gooseneck Flexible Steel
Length MicroBoom™24 609 mm / 24 in
Length MicroBoom™50 1270 mm / 50 in
Length MicroBoom™84 2134 mm / 84 in
Diameter 7.4 mm / .2 in
Connections mini-XLRm (bottom)
mini-XLRf (top)
Weight MicroBoom™24 45 g / 1.6 oz
Weight MicroBoom™50 78 g / 2.5 oz
Weight MicroBoom™84 111 g / 4 oz
Finish Black Finish / White Finish
Additional information